Tại sao chọn chúng tôi

• Class 2 is kind of colored anodized surface with a variety of basic colors such as black or mixed, blue, red, yellow, orange, purple, green, ...

PROPERTIES OF COLOR ANODIZING FILM (TYPE II) FROM ALUTEK

• Variety of color.
• High color fastness.
• Uniform color on the same type of aluminium alloys
• High smoothness
• Can achieve salt spray resistance in excess of 336 hours.

•    Good heat dissipation

Anodizing of aluminium is accomplished by immersing aluminumpart into a tank filled with an acid electrolyte bath and passing an electric current through the solution. Anodizing is one of the most common surface treatments of aluminum. In all anodizing processes, the basic reaction is conversion of the aluminum surface to aluminum oxide. The aluminum part, when made anodic in an electrolytic cell, causes the oxide layer to become thicker, leading to better corrosion and wear resistance. For decorative purposes, the oxide layer formed on the surface can be dyed. Anodizing aluminium was first used on an industrial scale in 1923 to protect Duralumin Seaplane parts from corrosion. This early chromic acid process was called the Bengough-Stuart process and was documented in British defence specification DEF STAN 03-24/3. It is still used today and is classified as type I (I, IB) according to the 8625 US standard MIL.

II.CLASSIFICATION OF ANODIZING OF ALUMINIUM

There are several types of anodizing of aluminium. The basic classifications for MIL-A-8625F are Type I—Chromic acid anodizing: Conventional coatings formed from a chromic acid bath. Chromic anodize coatings are principally used for aerospace applications requiring corrosion resistance and good paint adhesion. Type II—Sulfuric acid anodizing: Conventional coatings formed from a sulfuric acid bath. Sulfuric anodizing is the most commonly used and most suitable process for coloring. - Class 1 is kind of clear anodizing on aluminum, anodized layer may differ in color due to the alloy composition, with aluminum alloy components are less altered little more color. - Class 2 is kind of colored anodized surface with a variety of basic colors such as black or mixed, blue, red, yellow, orange, purple, green, ... Type III—Hard coat anodizing: Low-temperature bath and higher current densities to produce thicker coatings, which provide greater wear and abrasion-resistant surfaces. Type III anodize finishes can be dyed or non-dyed. THE COMPARISON TABLE OF SEVERAL ANODIZING TYPES

Anodizing Type	Temperature	Treatment time	Color appearance	Thickness
Type I	25 - 40 °C	20 - 40 minutes	Clear	2-5 pm
Type II, class 1	18 - 22 °C	5-15 minutes	Clear	2 - 5 pm
Type II, class 2	18 - 22 °C	10 - 40 minutes	Many colors	5 - 20 pm m
Type III	-5 - 0 °C	60 - 120 minutes	Bronze, gray, black (2)	5 - 100 pm (1)

** Notes: (1) - can be adjusted, (2) - please see the color table for hard anodizing.   TABLE OF COLOR OF HARD ANODIZING FILM

Al alloys	A1100	A2011	A2014	A2024	A5052	A6061	A6063	A7075
Color	Bronze	Gray	Gray	Bronze	Black	Black	Black	Bronze

PROPERTIES OF HARD ANODIZING FILM FROM ALUTEK

• Unmatched wear properties
• Coatings wear as well as or better than hardened steels (HRC values of 70) as judged by Suga and Taber Wear tests.
• Can achieve salt spray resistance in excess of 1000 hours.
• Good for salvage work of parts with critical dimensional specifications.
• Can achieve very tight tolerances.
• High dielectric strength to 2000VDC.
• Good heat dissipation

PROPERTIES OF COLOR ANODIZING FILM (TYPE II) FROM ALUTEK

• Variety of color.
• High color fastness.
• Uniform color on the same type of aluminium alloys
• High smoothness
• Can achieve salt spray resistance in excess of 336 hours.
• Good heat dissipation

We are building day by day; processes are managed through strict checks to perform the good quality and the best stability. ALUTEK offers a chemical engineering staff that works with each individual client to develop an anodizing solution that is custom designed to each application. For more information on our custom electrolytic and hard anodizing services, please contact us directly. We are looking forward to co-operating with you.

ALUTEK offers a chemical engineering staff that works with each individual client to cdevelop an anodizing solution that is custom designed to each application. For more information on our custom electrolytic and hard anodizing services, please contact us directly. We are looking forward to co-operating with you.